Power: 600 watts (High efficiency)
Expected Life Span: 24,000 hours
Lumen: 90,000 lumens
Color Temperature: 2,100K
Contains more red spectrum, which is best for flowering.
Strong power to penetrate fog
High output, high luminescence efficiency.
Fit for all standard 600 watts HPS grow light systems
Fit for the Heliophile, such as Rose and Camellia, which grows better at longer sunshine time.
600W Powerful Ballast:
High power 600 watts
Built-in two louvers
Built-in standard reflector interface
Fit for 600 watts High Pressure Sodium Lamps
Pass CE Certificate
Energy saving and environmental friendly
Stabilize input power and output luminous flux
Recycle material and improve usable efficiency of power supply equipment capability
Prevent the electricity from striking the bulb repeatedly and make the bulb nigrescence prematurely
Protect your eyes when continually working
Rated Power: 600 watts
Specified Frequency: 50/60Hz
Working Voltage Range: Switchable 120V/240V
Install Space Requirement: 13in. x 8in. x 8-1/4in. (33cm x 21cm x 21cm)
With a 8-1/3ft. power cord to wall (US standard plug)
6" Large Air Cooled Reflector Hood:
Multi-surface large hood to reflect most light to your plants
Standard 6" air vent fits to 6" exhaust fan system(NOT included) and fits to any grow tents
Removable tempered glass locked by switch for temperature control
Tempered glass assemble with exhaust fan(NOT included) can deflate heat for plants not need much heat
Tempered glass removed without exhaust system can offer more heat for tropical plants
This Large air cooled reflector fits for not only 600 watts grow light system, but also 1,000 watts grow light system
You could up-grade your light system up to 1,000 watts just by replacing the bulb and the matchable ballast
Dimensions: 26in.(L) x 22-1/4in.(W) x 10in.(H)
Fit for E39 bulb cap
Detachable durable ceramic socket
Easy to install if you need to change your reflector
Ceramic socket should be used with ballast for steady power supply.
With a 14-3/8ft. power cord
Timer: (Free Gift)
Safe and easy to use
Ensure timer is disconnected from power supply.
Press down the segment pushbuttons according to how long you require the system to stay on.
Each segment is 15 minutes.
Turn the timer dial until the black pointer is set to the present time.
Plug in your grow light system to the timer and then the timer to the power supply socket and switch the socket on.
Timer and your light system go working till the stop time.
The timer can be overridden by moving the red switch on the side.
Timer Power: Max Wattage 1725W; Max Current 15A/120V/60Hz