Power: 400 watts (High efficiency)
Expected Life Span: 24,000 hours
Lumen: 50,000 lumens
Color Temperature: 2,100K
Contains more red spectrum, which is best for flowering.
Strong power to penetrate fog
High output, high luminescence efficiency.
Fit for all standard 400 watts HPS grow light systems
Fit for the Heliophile, such as Rose and Camellia, which grows better at longer sunshine time.
400W Powerful Ballast:
High power 400 watts
Built-in two louvers
Built-in standard reflector interface
Fit for 400 watts High Pressure Sodium Lamps or 400 watts Metal Halide Lamps
Pass CE Certificate
Energy saving and environmental friendly
Stabilize input power and output luminous flux
Recycle material and improve usable efficiency of power supply equipment capability
Prevent the electricity from striking the bulb repeatedly and make the bulb nigrescence prematurely
Protect your eyes when continually working
Rated Power: 400 watts
Specified Frequency: 50/60Hz
Working Voltage Range: Switchable 120V/240V
Install Space Requirement: 12in. x 8in. x 8-1/4in. (31cm x 21cm x 21cm)
With a 8-1/3ft. power cord to wall (US standard plug)
6" Cool Tube Reflector:
Cool tube design for best air cooling
Removable extended wings for lighting controlling (assembling required)
Multi-surface large reflector with extra wings to reflect most light to your plants
Standard 6" air vent fits to 6" exhaust fan system(NOT included) and fits to any grow tents
Tempered glass Tube with exhaust fan(NOT included) can deflate heat for plants not need much heat
You could up-grade your light system up to 1,000 watts just by replacing the bulb and the matchable ballast.
Overall Dimensions: 19-1/2in.(L) x 6in.(Diameter)
Interior Reflective Sheet Dimensions: 19in.(L) x 9in.(W)
Extended Reflective Wings Dimensions: 2x 14in.(L) x 3in.(W)
Fit for E39 bulb cap
Detachable durable ceramic socket
Easy to install if you need to change your reflector
Ceramic socket should be used with ballast for steady power supply.
With a 14-3/8ft. power cord
Timer: (Free Gift)
Safe and easy to use
Ensure timer is disconnected from power supply.
Press down the segment pushbuttons according to how long you require the system to stay on.
Each segment is 15 minutes.
Turn the timer dial until the black pointer is set to the present time.
Plug in your grow light system to the timer and then the timer to the power supply socket and switch the socket on.
Timer and your light system go working till the stop time.
The timer can be overridden by moving the red switch on the side.
Timer Power: Max Wattage 1725W; Max Current 15A/120V/60Hz