Power: 600 watts (High efficiency)
Expected Life Span: 24,000 hours
Lumen: 90,000 lumens
Color Temperature: 2,100K
Contains more red spectrum, which is best for flowering.
Strong power to penetrate fog
High output, high luminescence efficiency.
Fit for all standard 600 watts HPS grow light systems
Fit for the Heliophile, such as Rose and Camellia, which grows better at longer sunshine time.
600W Digital Electronic Ballast:
High power 600 watts
Built-in heat output holes.
Built-in standard reflector interface
Fit for 600 watts High Pressure Sodium Lamps or 600 watts Metal Halide Lamps
Pass FCC and CE Certificate
Energy saving and environmental friendly
Stabilize input power and output luminous flux
Reduce wastage and improve usable efficiency of power supply equipment capability
Shielded component to protect against Radio Frequency Interference to other equipment
Prevent the electricity from striking the bulb repeatedly and make the bulb nigrescence prematurely
Protect your eyes when continually working
Rated Power: 600 watts
Specified Frequency: 50/60Hz
Working Voltage Range: 120V/240V
Install Space Requirement: 12in. x 6-1/4in. x 4in. (31cm x 16cm x 16cm)
With a 8-1/3ft. power cord to wall (US standard plug)
Extra Large Hard Light Aluminum Reflector Hood:
Made with high-quality aluminum.
Excellent for assembling light.
Special Hard Light Reflector with many reflective surfaces around to form a reflective hood can intensify light effectively.
Reflect large-area and offer sufficient light for plants, especially effective for the growth of heliophilous plants.
This large reflector fits for not only 600 watts grow light system, but also 1,000 watts and 400 watts grow light systems.
You could up-grade your light system up to 1,000 watts just by replacing the bulb and the matchable ballast.
Reflector Dimension: 20-1/2in.(L) x 19-3/4in.(W) x 5-1/2in.(H)
Fit for E39 bulb cap
Detachable durable ceramic socket
Easy to install if you need to change your reflector
Ceramic socket should be used with ballast for steady power supply.
With a 14-3/8ft. power cord
Safe and easy to use
Ensure timer is disconnected from power supply.
Press down the segment pushbuttons according to how long you require the system to stay on.
Each segment is 15 minutes.
Turn the timer dial until the black pointer is set to the present time.
Plug in your grow light system to the timer and then the timer to the power supply socket and switch the socket on.
Timer and your light system go working till the stop time.
The timer can be overridden by moving the red switch on the side.
Timer Power: Max Wattage 1725W; Max Current 15A/120V/60Hz
1x 600W High Pressure Sodium Bulb
1x 600W Digital Electronic Ballast
1x Extra Large Hard Light Reflector Hood
1x Ceramic Socket
1x Free Timer
1Set Hi-Low Yoyo Reflector Hanging Kit